Thule Tension Rafters - G2 

An additional tension rafter which can be fitted in the middle or at either end* of the awning to reinforce the awning. 

The additional rafter is very easy to install and ensures an optimal tensioned awning fabric for a better wind resistance. The rafter is made from durable anodised aluminium profiles in combination with high impact plastics. 

To install simply open your awning, place the rafter into the awning and slightly roll-up the awning fabric until the rafter is under tension.

Available in various lengths from 2.00m to 3.00m depending on the type of Thule Omnistor awning installed.

*2.0m and 4900 rafters fit at the end only

Please check below your awning model and length to select the appropriate size tension rafter:

Wall Mounted:

4200|4900|5003|5200 2.60m - 2.0m Needed

4200|4900|5003|5200 3.0-5.0m - 2.5m Needed

8000/6900* 4.0-6.0m - 2.75m Needed

Roof Mounted:

6002|6200|6300 2.60m - 2.0m Needed

6002|6200|6300 3.0-5.0m - 2.5m Needed

9200 4.0-6.0m - 3.0m Needed

Rail Mounted:

1200 3.0-5.5m - 2.5m Needed

This Thule Tension rafter comes in 2 pieces which connect together, therefore the space needed for storage is only half the length of the fitted rafter (roughly 1.5m).

*An adapter piece is needed for the 6900 awning. Please contact us and we can help you with your order.

Enhance your tension rafter with additional Thule Fabric Clamps to provide a more secure fastening between the awning fabric and the tension or blocker rafter to prevent the unpleasant noise of a flapping awning fabric due to wind.