Vamoose Awning Rail

The Vamoose Awning Combi Rail is the ideal campervan awning rail. The rail fits multiple vehicles and provides a combination of gutter and awning rail. It comes with front and rear end caps included as part of the kit.

The awning rail is produced from malleable aluminium so has greater flexibility and has been moulded to the specified vehicle's profile.

Full fitting instructions, screws and 3M adhesive tack (for ease of positioning) are also supplied as standard.

The Vamoose Awning Rail is suitable for the following Wall Mounted Thule Awnings / Fiamma Awnings:

TO 3200

TO 4200/ 4900

TO 5102

TO 5200

F45i

F45S

F45L

F35

To fit an awning to the Vamoose awning combi rail DV100 awning brackets will also be required - x2 if your awning is less than 3.5m or x3 if your awning is 3.5m or greater.

The Vamoose Rail will also accept beading between 6mm-9mm if you wish to attach a tent or driveaway awning.

To order your Vamoose Awning rail, just select your vehicle type using the selectors below, choose the location of the rail (passenger side or off side) and select the length type of the vehicle. The selectors will then determine which awning rail is required for your vehicle. 

If you need to confirm what awning length can be supported for your vehicle, please review the awning rail sizing in the document below. Ideally allow the rail to be slightly longer than the awning for sufficient gutter at either end. Awning rails can be cut down if required. 

Vamoose Combi Rail Information: Supported Vehicles and Sizing  

Your Vamoose Awning rail will be delivered to you directly in 7-10 working days, however most can be delivered much quicker. Please contact us here prior to ordering if you need the rail by a specific date to check this can be met.