Thule Roof Rack Smart Clamp System

This Thule Smart Clamp system is an easy-to-install roof rack for vans which must be used in combination with an existing Thule Omnistor 6200/6300 awning or the installation of a new Thule Omnistor 6300 Awning Pack (at the same time).  

Suitable for H2 Ducato, Jumper, Relay, Boxer vans from 2007 onwards and Movano vans from 2022 onwards.

Available in three lengths to fit L2, L3 and L4 vans.

If your van has ostructions to the roof meaning the full length of the space on the roof isn't available, an alternative short version (with 1.64m long rails) is available here.

If you do not have / intend to have an Awning installed, an alternative version is available here.

Features:

• Carry loads of up to 200KG on your roof (depending on van size)
• Set of 2 base rails with smart clamps and awning connectors
• Easy installation without drilling by mounting the smart clamps to the van's existing fix points 
• Base rails are glued onto the vehicle roof and connected with the smart clamps

Installation Information:

• Compatible with a Thule awning mounted with the Ducato, Jumper, Relay, Boxer awning adapters from 2017 onwards
• Compatible with a Thule awning mounted with an older awning adapter (2-pieces) with the transformation kit
• Van roof should be clear of obstacles within 10cm of the fix points

Fix Points:

• L2H2 - 2 x base rails of 2.83m - 6 Fixpoints (takes max 4 Thule Pro Bars)
• L3H2 - 2 x base rails of 3.44m - 8 Fixpoints (takes max 6 Thule Pro Bars)
• L4H2 - 2 x base rails of 3.78m - 8 Fixpoints (takes max 6 Thule Pro Bars)

**Please note that if cross bars are required these need to be ordered separately as a Product Extra. These cross bars will allow fitting of roof accessories such as roof boxes and carriers for sportswear etc. 

The Bars are supplied in pairs and come in two sizes:

Low: +/-10cm
High: +/-13cm

For more information on the cross bars see here.