Thule QuickFit Awning Tent - Universal and compact awning tent with an ultra-fast set up:

The Thule QuickFit Awning tent is designed with a modular approach. All of the sides are fully zippable and it can be opened up to create an open porch. It can also be opened sideways to create a door on either side and the panels can also be opened from top to bottom to create an open window.

There are multiple sizes available to fit awnings with a mounting height between 2.25m and 2.84m (the mounting height should be measured from the ground to the underside of the Thule cassette).

The QuickFit tent can be used with the following Thule awnings:

• Thule Omnistor 1200
• Thule Omnistor 4200
• Thule Omnistor 4900
• Thule Omnistor 5002 & 5003
• Thule Omnistor 5200
• Thule Omnistor 5500
• Thule Omnistor 6002
• Thule Omnistor 6200 & 6300
• Thule Omnistor 6900
• Thule Omnistor 8000
• Thule Omnistor 9200
• Fiamma Awnings (additional fixation kit required - please contact us)

The QuickFit tents need a minimum awning size for the different available widths as follows:

• 2.60m tent width requires a minimum 3.00m awning length
• 3.10m tent width requires a minimum 3.50m awning length
• 3.60m tent width requires a minimum 4.00m awning length

There is also a 3.00m tent designed specifically for use on H2 Ducato / Jumper / Boxer / Relay / Movano vans with the 6200/6300 Installed. This tent is suitable for Awnings 3.25m - 4.0m in length and has a mounting height of 2.3 - 2.5m.

Key Features:

• Light yet robust structure that fits in a small bag for compact storage 
• Fast and easy set-up, as the complete tent is in one piece and doesn't need profiles 
• The tent easily slides into the caravan rail or the additional rail below the awning cassette, and is easily fixed to the front rail of the awning. 
• Made from innovative Ripstop fabric, a light woven and tear-resistant material
• Double ceiling, giving better ventilation and insulation is created by suspending the tent below the awning fabric 
• Additional shade and modern look thanks to integrated front canopy in black, grey, and white 
• Reduced condensation thanks to two permanent ventilation openings 
• Front panel has integrated doors on the left and right

The QuickFit tent kit comes with:

• Curtains    
• Windslip    
• Wheel cover    
• Bag    

Note: A Tent Fixation or Mounting Kit may be required if not currently on your awning / caravan rail. Please see here the range available and if you are unsure contact us.

There are also a number of optional, but recommended products for use with the Thule Quickfit Awning tent; Additional Tension Rafters to support the ends and middle of the tent, Side Tensioning kit to allow better sealing and a Side Hold Down Kit to give some protection from the wind.