Motor kit for Thule Omnistor 8000/9200 Awnings

•  Retrofit installation either 230V or 12V with an Inverter

• Ease of use

• Security operation

Specifications

• 230 VAC EM (= electronical-mechanical limit switch) motor

• Includes remote control and control box

• A control box ensures that the awning cannot be opened whilst the vehicle is moving

• Simple connection to a 230 VAC supply (with a 12V connection use a 300 Watt inverter, which is available at your dealer)

• Settings are set by an electronical limit switch (closed position) and a mechanical limit switch (open position) so that   the frame always closes correctly

• Manual override with a handcrank so that the awning can be operated at any time, even during a power failure

• Use an inverter which meets these specifications:

- Intput: 10-15 V DC

- Output: 230 VAC/50Hz

- Capacity: 300W permanent, 600W max

- Efficiency (for rectangle wave): min. 90%

• The D+ connection is included in the control box

• Possibility to operate the motor unit by a wired switch connection*

• Measurements control box: 160 x 92 x 51 mm

- Cable length motor: 5 m

- Power supply: 3x 1,5 mm2

• EMC approved

• Motor with thermal protection

* Monostable switch required (ON)-OFF-(ON)/ (NC)-NO-(NC)

Awning will open completely with one touch